This article I will configure an EtherCAT Master on OMRON NX1, using EtherCAT IO LINK Gateway AL1332 and Phoenix Contact AL E EC DI8 DO8 M12, two EtherCAT Slaves in the EtherCAT network. for the IOLINK sensor, Keyence LR-TB2000 is used.Let’s start! Thanks! This article was made possible thanks to equipment loaned from OMRON Corporation and ifm efector co. ltd. Thank you very much. Omron Japan As a leading automation … Continue reading OMRON#Using NX1 to build an EtherCAT Network