This article describes the initial set-up of the SIEMENS Unified Basic panel and how to troubleshoot problems when first starting it up.
Come on, let’s enjoy FA.
Foreword
Thank you from the bottom of my heart for visiting my technical blog and YouTube channel.
We are currently running the “Takahashi Chris” radio show with Full-san (full@桜 八重 (@fulhause) / X) which I deliver every Wednesday night.
Sharing, not hoarding, technical knowledge
We publish technical information related to factory production technology and control systems for free, through blogs and videos.
With the belief that “knowledge should be accessible to everyone,” we share practical know-how and real-world troubleshooting cases from our own field experience.
The reason we keep it all free is simple: to help reduce the number of people who struggle because they simply didn’t know.
If you’ve ever thought:
- “Will this PLC and device combination actually work?”
- “I’m having trouble with EtherCAT communication—can someone test it?”
- “I want to try this remote I/O, but we don’t have the testing environment in-house…”
Feel free to reach out!If lending equipment or sharing your configuration is possible, we’re happy to verify it and share the results through articles and videos.
(We can keep company/product names anonymous if requested.)
How can you support us?
Currently, our activities are nearly all unpaid, but creating articles and videos takes time and a proper testing environment.If you’d like to support us in continuing and expanding this content, your kind help would mean a lot.
Membership (Support our radio show)
This support plan is designed to enhance radio with Mr Full.
https://note.com/fulhause/membership/join
Amazon Gift List (equipment & books for content production)
Lists equipment and books required for content creation.
https://www.amazon.co.jp/hz/wishlist/ls/H7W3RRD7C5QG?ref_=wl_share
Patreon (Support articles & video creation)
Your small monthly support will help to improve the environment for writing and verifying articles.
https://www.patreon.com/user?u=84249391
Just trying to share things that could’ve helped someone—if only they’d known.
Your support helps make knowledge sharing more open and sustainable.
Thank you for being with us.
soup01threes*gmail.com
Technical knowledge shouldn’t be kept to ourselves.
Implementation
In this article, the process is as follows: set IP address, add panel from TIAV20, install Image, add Graph Object.
Basic Setup on Panel
Power on the WinCC Unified Basic panel and click on the arrow to the left of the screen.
A drop-list is displayed.
Click on Network and internet and set the IP address in the WinCC Unified Basic panel.
Click on Network setting.
The network configuration screen of the WinCC Unified Basic panel appears.
Set the IP address to match your application.
Finally, click Start Runtime to start Runtime.
Please wait a moment…
Add new Panel
Add a new project to TIAV20 and add a new device with Add new device.
Add the MTP400 Unified Basic used in this article to your project.
Done!
Runtime settings
Open the MTP400 Runtime Settings.
This time, Encrypted communication is not used, so remove the Checkbox in the orange box below.
Download
Download HMI project. First the HMI hardware and the project version are different, so the project must be downloaded using the Ethernet Protocol.
Update Version
Click Online>Extend download to device.
Select Use other IP and enter the IP address into the WinCC Unified Basic panel settings.
Click Connect.
Done!Now that you are connected to the TIA and WinCC Unified Basic panel, click Load to update the panel’s Verison.
Fit the version
Please Download again, this time with Fit Checkbox.
Next, set Full download in the Action field of Load Runtime.
Download your project to the HMI with Load.
This time an error occurred with no HMI ImageFile.
Install the Images
Download the Wincc panel image File from the following Link.
Start the Setup File and select the version of TIA you are about to install. The version used in this article is V20.
Done!
Create a Graphic object in screen
Finally, a Graphic Object is added to the initial screen. The Graphic Object is selected from the Basic Object menu.
Done!Image Object has been added.
Open the Graph Object’s Properties and click on General>Graphic>Static Value.
Select Graphic.
Next, click on the down arrow.
The image selection screen appears. Add a new image using the button shown below and insert it into the screen.
Done!
Download
Download one last time!