Today when I wanted to install Runtime on the EXOR panel, I ran into a problem with the BSP Version being too old, so this article will be the procedure for updating the BSP.

Downlaod BSP

Download the appropriate BSP from the link below.

https://www.exorint.com/support/jmobile-panel-bsp-studio

The Zip File was downloaded as shown below.

Update Main OS

Login to the System Management screen in the EXOR panel and go to Management>Main OS>Update to upload a new BSP File.

OK to proceed.

The Image and MD5 File selection screen will appear.

Select the File you have just downloaded from EXOR HP.

Proceed with PROCESS.

Just a second..

OK to proceed.

OS is updating…

Done!The panel will automatically restart.

Let’s proceed with OK.

Restart the panel again.

Please set Password and other settings one more time.

Clear Data

Now clear the data inside the panel by going to Management>Data>Clear all.

Proceed with Ok.

Restart OS

Next, restart the panel by going to Restart>Main OS.

Update Config OS

Config OS should be updated in the same way as the Main OS.

Result

HMI successfully installed the new Runtime.

Do not forget to start your HMI Application!