For some reason, SIMOTION’s STOP LED flashes all the time and I can’t even go online…
You probably need a Memory Reset.
First turn off the power.
SIMOTION has two switches that rotate.
Set SIMNCK=0 and PLC=2.
and power cycle.
The STOP LED will change from flashing to lighting. Set the PLC switch to 3.
And the Stop LED will start flashing again.
Now turn the PLC switch back to 2 and then immediately back to 3.
Finally, when the STOP LED of SIMOTION comes back on, it’s OK.
Turn off the power and turn it on again.
Here is the SIMOTION’s LED LAYOUT.
