ctrlX#Let's Use Telegraf App |

[agent]
interval = “5s”
round_interval = true
flush_interval = “5s”

## Install InfluxDB at first
## Set up the InfluxDB with organization and initial bucket
## Log in the InfluxDB UI and get the token
## Configure the output plugin influxdb_v2 with these datas
[[outputs.influxdb_v2]]
urls = [“https://127.0.0.1/influxdb”]
token = “CquPrz9Vmbx-QgvMqGJgMVdHADDkjVAKZELRcANRKqWXRr-nxKQfVEGesQz6gad5GNV1neHdSMKfkd5eb5urkA==”
organization = “mana”
bucket = “mainBucket”
insecure_skip_verify = true

## Configure the input plugin with the username and password to ctrlX Core
[[inputs.ctrlx_datalayer]]
## Hostname or IP address of the ctrlX CORE Data Layer server
## example: server = “localhost” # Telegraf is running directly on the device
## server = “192.168.1.1” # Connect to ctrlX CORE remote via IP
## server = “host.example.com” # Connect to ctrlX CORE remote via hostname
## server = “10.0.2.2:8443” # Connect to ctrlX CORE Virtual from development environment
server = “192.168.5.67:8443”

## Authentication credentials
username = “boschrexroth”
password = “boschrexroth”

## Use TLS but skip chain & host verification
insecure_skip_verify = true

## Timeout for HTTP requests. (default: “10s”)
# timeout = “10s”

## Create a ctrlX Data Layer subscription.
## It is possible to define multiple subscriptions per host. Each subscription can have its own
## sampling properties and a list of nodes to subscribe to.
## All subscriptions share the same credentials.
[[inputs.ctrlx_datalayer.subscription]]
## The name of the measurement. (default: “ctrlx”)
measurement = “metrics”

## Configure the ctrlX Data Layer nodes which should be subscribed.
## address – node address in ctrlX Data Layer (mandatory)
## name – field name to use in the output (optional, default: base name of address)
## tags – extra node tags to be added to the output metric (optional)
## Note:
## Use either the inline notation or the bracketed notation, not both.
## The tags property is only supported in bracketed notation due to toml parser restrictions
## Examples:
## Inline notation
nodes=[
{name=”cpu_usage_percent”, address=”framework/metrics/system/cpu-utilisation-percent”},
]
## Bracketed notation
# [[inputs.ctrlx_datalayer.subscription.nodes]]
# name =”available”
# address=”framework/metrics/system/memavailable-mb”
# ## Define extra tags related to node to be added to the output metric (optional)
# [inputs.ctrlx_datalayer.subscription.nodes.tags]
# node_tag1=”node_tag1″
# node_tag2=”node_tag2″
# [[inputs.ctrlx_datalayer.subscription.nodes]]
# name =”used”
# address=”framework/metrics/system/memused-mb”

## The switch “output_json_string” enables output of the measurement as json.
## That way it can be used in in a subsequent processor plugin, e.g. “Starlark Processor Plugin”.
# output_json_string = false

## Define extra tags related to subscription to be added to the output metric (optional)
# [inputs.ctrlx_datalayer.subscription.tags]
# subscription_tag1 = “subscription_tag1”
# subscription_tag2 = “subscription_tag2”

## The interval in which messages shall be sent by the ctrlX Data Layer to this plugin. (default: 1s)
## Higher values reduce load on network by queuing samples on server side and sending as a single TCP packet.
#publish_interval = “1s”

## The interval a “keepalive” message is sent if no change of data occurs. (default: 60s)
## Only used internally to detect broken network connections.
# keep_alive_interval = “60s”

## The interval an “error” message is sent if an error was received from a node. (default: 10s)
## Higher values reduce load on output target and network in case of errors by limiting frequency of error messages.
# error_interval = “10s”

## The interval that defines the fastest rate at which the node values should be sampled and values captured. (default: 1s)
## The sampling frequency should be adjusted to the dynamics of the signal to be sampled.
## Higher sampling frequence increases load on ctrlX Data Layer.
## The sampling frequency can be higher, than the publish interval. Captured samples are put in a queue and sent in publish interval.
## Note: The minimum sampling interval can be overruled by a global setting in the ctrlX Data Layer configuration (‘datalayer/subscriptions/settings’).
#sampling_interval = “1s”

## The requested size of the node value queue. (default: 10)
## Relevant if more values are captured than can be sent.
# queue_size = 10

## The behaviour of the queue if it is full. (default: “DiscardOldest”)
## Possible values:
## – “DiscardOldest”
## The oldest value gets deleted from the queue when it is full.
## – “DiscardNewest”
## The newest value gets deleted from the queue when it is full.
# queue_behaviour = “DiscardOldest”

## The filter when a new value will be sampled. (default: 0.0)
## Calculation rule: If (abs(lastCapturedValue – newValue) > dead_band_value) capture(newValue).
# dead_band_value = 0.0

## The conditions on which a sample should be captured and thus will be sent as a message. (default: “StatusValue”)
## Possible values:
## – “Status”
## Capture the value only, when the state of the node changes from or to error state. Value changes are ignored.
## – “StatusValue”
## Capture when the value changes or the node changes from or to error state.
## See also ‘dead_band_value’ for what is considered as a value change.
## – “StatusValueTimestamp”:
## Capture even if the value is the same, but the timestamp of the value is newer.
## Note: This might lead to high load on the network because every sample will be sent as a message
## even if the value of the node did not change.
# value_change = “StatusValue”

[[outputs.influxdb_v2]]
urls = [“https://127.0.0.1/influxdb”]
token = “CquPrz9Vmbx-QgvMqGJgMVdHADDkjVAKZELRcANRKqWXRr-nxKQfVEGesQz6gad5GNV1neHdSMKfkd5eb5urkA==”
organization = “mana”
bucket = “mainBucket”
insecure_skip_verify = true

[agent]
interval = “5s”
round_interval = true
flush_interval = “5s”

## Install InfluxDB at first
## Set up the InfluxDB with organization and initial bucket
## Log in the InfluxDB UI and get the token
## Configure the output plugin influxdb_v2 with these datas
[[outputs.influxdb_v2]]
urls = [“https://127.0.0.1/influxdb”]
token = “CquPrz9Vmbx-QgvMqGJgMVdHADDkjVAKZELRcANRKqWXRr-nxKQfVEGesQz6gad5GNV1neHdSMKfkd5eb5urkA==”
organization = “mana”
bucket = “mainBucket”
insecure_skip_verify = true

## Configure the input plugin with the username and password to ctrlX Core
[[inputs.ctrlx_datalayer]]
## Hostname or IP address of the ctrlX CORE Data Layer server
## example: server = “localhost” # Telegraf is running directly on the device
## server = “192.168.1.1” # Connect to ctrlX CORE remote via IP
## server = “host.example.com” # Connect to ctrlX CORE remote via hostname
## server = “10.0.2.2:8443” # Connect to ctrlX CORE Virtual from development environment
server = “192.168.5.67:8443”

## Authentication credentials
username = “boschrexroth”
password = “boschrexroth”

## Use TLS but skip chain & host verification
insecure_skip_verify = true

## Timeout for HTTP requests. (default: “10s”)
# timeout = “10s”

## Create a ctrlX Data Layer subscription.
## It is possible to define multiple subscriptions per host. Each subscription can have its own
## sampling properties and a list of nodes to subscribe to.
## All subscriptions share the same credentials.
[[inputs.ctrlx_datalayer.subscription]]
## The name of the measurement. (default: “ctrlx”)
measurement = “metrics”

## Configure the ctrlX Data Layer nodes which should be subscribed.
## address – node address in ctrlX Data Layer (mandatory)
## name – field name to use in the output (optional, default: base name of address)
## tags – extra node tags to be added to the output metric (optional)
## Note:
## Use either the inline notation or the bracketed notation, not both.
## The tags property is only supported in bracketed notation due to toml parser restrictions
## Examples:
## Inline notation
nodes=[
{name=”cpu_usage_percent”, address=”framework/metrics/system/cpu-utilisation-percent”},
]
## Bracketed notation
# [[inputs.ctrlx_datalayer.subscription.nodes]]
# name =”available”
# address=”framework/metrics/system/memavailable-mb”
# ## Define extra tags related to node to be added to the output metric (optional)
# [inputs.ctrlx_datalayer.subscription.nodes.tags]
# node_tag1=”node_tag1″
# node_tag2=”node_tag2″
# [[inputs.ctrlx_datalayer.subscription.nodes]]
# name =”used”
# address=”framework/metrics/system/memused-mb”

## The switch “output_json_string” enables output of the measurement as json.
## That way it can be used in in a subsequent processor plugin, e.g. “Starlark Processor Plugin”.
# output_json_string = false

## Define extra tags related to subscription to be added to the output metric (optional)
# [inputs.ctrlx_datalayer.subscription.tags]
# subscription_tag1 = “subscription_tag1”
# subscription_tag2 = “subscription_tag2”

## The interval in which messages shall be sent by the ctrlX Data Layer to this plugin. (default: 1s)
## Higher values reduce load on network by queuing samples on server side and sending as a single TCP packet.
#publish_interval = “1s”

## The interval a “keepalive” message is sent if no change of data occurs. (default: 60s)
## Only used internally to detect broken network connections.
# keep_alive_interval = “60s”

## The interval an “error” message is sent if an error was received from a node. (default: 10s)
## Higher values reduce load on output target and network in case of errors by limiting frequency of error messages.
# error_interval = “10s”

## The interval that defines the fastest rate at which the node values should be sampled and values captured. (default: 1s)
## The sampling frequency should be adjusted to the dynamics of the signal to be sampled.
## Higher sampling frequence increases load on ctrlX Data Layer.
## The sampling frequency can be higher, than the publish interval. Captured samples are put in a queue and sent in publish interval.
## Note: The minimum sampling interval can be overruled by a global setting in the ctrlX Data Layer configuration (‘datalayer/subscriptions/settings’).
#sampling_interval = “1s”

## The requested size of the node value queue. (default: 10)
## Relevant if more values are captured than can be sent.
# queue_size = 10

## The behaviour of the queue if it is full. (default: “DiscardOldest”)
## Possible values:
## – “DiscardOldest”
## The oldest value gets deleted from the queue when it is full.
## – “DiscardNewest”
## The newest value gets deleted from the queue when it is full.
# queue_behaviour = “DiscardOldest”

## The filter when a new value will be sampled. (default: 0.0)
## Calculation rule: If (abs(lastCapturedValue – newValue) > dead_band_value) capture(newValue).
# dead_band_value = 0.0

## The conditions on which a sample should be captured and thus will be sent as a message. (default: “StatusValue”)
## Possible values:
## – “Status”
## Capture the value only, when the state of the node changes from or to error state. Value changes are ignored.
## – “StatusValue”
## Capture when the value changes or the node changes from or to error state.
## See also ‘dead_band_value’ for what is considered as a value change.
## – “StatusValueTimestamp”:
## Capture even if the value is the same, but the timestamp of the value is newer.
## Note: This might lead to high load on the network because every sample will be sent as a message
## even if the value of the node did not change.
# value_change = “StatusValue”

[[inputs.opcua]]
## Metric name
name = “opcua”
#
## OPC UA Endpoint URL
endpoint = “opc.tcp://192.168.5.134:14840/groov”
#
## Maximum time allowed to establish a connect to the endpoint.
connect_timeout = “10s”
#
## Maximum time allowed for a request over the estabilished connection.
request_timeout = “5s”
#
## Security policy, one of “None”, “Basic128Rsa15”, “Basic256”,
## “Basic256Sha256”, or “auto”
security_policy = “None”
#
## Security mode, one of “None”, “Sign”, “SignAndEncrypt”, or “auto”
security_mode = “None”
#
## Path to cert.pem. Required when security mode or policy isn’t “None”.
## If cert path is not supplied, self-signed cert and key will be generated.
# certificate = “/etc/telegraf/cert.pem”
#
## Path to private key.pem. Required when security mode or policy isn’t “None”.
## If key path is not supplied, self-signed cert and key will be generated.
# private_key = “/etc/telegraf/key.pem”
#
## Authentication Method, one of “Certificate”, “UserName”, or “Anonymous”. To
## authenticate using a specific ID, select ‘Certificate’ or ‘UserName’
# auth_method = “Anonymous”
#
## Username. Required for auth_method = “UserName”
# username = “”
#
## Password. Required for auth_method = “UserName”
# password = “”
#
## Option to select the metric timestamp to use. Valid options are:
## “gather” — uses the time of receiving the data in telegraf
## “server” — uses the timestamp provided by the server
## “source” — uses the timestamp provided by the source
# timestamp = “gather”
#
## Node ID configuration
## name – field name to use in the output
## namespace – OPC UA namespace of the node (integer value 0 thru 3)
## identifier_type – OPC UA ID type (s=string, i=numeric, g=guid, b=opaque)
## identifier – OPC UA ID (tag as shown in opcua browser)
## tags – extra tags to be added to the output metric (optional)
## Example:
## {name=”ProductUri”, namespace=”0″, identifier_type=”i”, identifier=”2262″, tags=[[“tag1″,”value1”],[“tag2”,”value2]]}
nodes = [
# {name=””, namespace=””, identifier_type=””, identifier=””},
# {name=””, namespace=””, identifier_type=””, identifier=””},
{name=”DIChannel0″,namespace=”2″,identifier_type=”s”,identifier=”Devices/[optoController]/OptoMMP/Modules/Channels/DI_CHANNEL0/State”}
,{name=”DIChannel1″,namespace=”2″,identifier_type=”s”,identifier=”Devices/[optoController]/OptoMMP/Modules/Channels/DI_CHANNEL1/State”}
,{name=”AIRotarySwitch”,namespace=”2″,identifier_type=”s”,identifier=”Devices/[optoController]/OptoMMP/Modules/Channels/AI_RotarySwitch/Value”}
,{name=”AITempature”,namespace=”2″,identifier_type=”s”,identifier=”Devices/[optoController]/OptoMMP/Modules/Channels/AI_Tempature/Value”}
]
#
## Node Group
## Sets defaults for OPC UA namespace and ID type so they aren’t required in
## every node. A group can also have a metric name that overrides the main
## plugin metric name.
##
## Multiple node groups are allowed
#[[inputs.opcua.group]]
## Group Metric name. Overrides the top level name. If unset, the
## top level name is used.
# name =
#
## Group default namespace. If a node in the group doesn’t set its
## namespace, this is used.
# namespace =
#
## Group default identifier type. If a node in the group doesn’t set its
## namespace, this is used.
# identifier_type =
#
## Node ID Configuration. Array of nodes with the same settings as above.
# nodes = [
# {name=””, namespace=””, identifier_type=””, identifier=””},
# {name=””, namespace=””, identifier_type=””, identifier=””},
#]

## Enable workarounds required by some devices to work correctly
# [inputs.opcua.workarounds]
## Set additional valid status codes, StatusOK (0x0) is always considered valid
# additional_valid_status_codes = [“0xC0”]

# Retrieve data from MODBUS slave devices

## Security policy, one of “None”, “Basic128Rsa15”, “Basic256”,
## “Basic256Sha256”, or “auto”
security_policy = “None”
#
## Security mode, one of “None”, “Sign”, “SignAndEncrypt”, or “auto”
security_mode = “None”
#

[agent]
interval = “5s”
round_interval = true
flush_interval = “5s”

## Install InfluxDB at first
## Set up the InfluxDB with organization and initial bucket
## Log in the InfluxDB UI and get the token
## Configure the output plugin influxdb_v2 with these datas
[[outputs.influxdb_v2]]
urls = [“https://127.0.0.1/influxdb”]
token = “CquPrz9Vmbx-QgvMqGJgMVdHADDkjVAKZELRcANRKqWXRr-nxKQfVEGesQz6gad5GNV1neHdSMKfkd5eb5urkA==”
organization = “mana”
bucket = “mainBucket2”
insecure_skip_verify = true

## Configure the input plugin with the username and password to ctrlX Core
[[inputs.ctrlx_datalayer]]
## Hostname or IP address of the ctrlX CORE Data Layer server
## example: server = “localhost” # Telegraf is running directly on the device
## server = “192.168.1.1” # Connect to ctrlX CORE remote via IP
## server = “host.example.com” # Connect to ctrlX CORE remote via hostname
## server = “10.0.2.2:8443” # Connect to ctrlX CORE Virtual from development environment
server = “192.168.5.67:8443”

## Authentication credentials
username = “boschrexroth”
password = “boschrexroth”

## Use TLS but skip chain & host verification
insecure_skip_verify = true

## Timeout for HTTP requests. (default: “10s”)
# timeout = “10s”

## Create a ctrlX Data Layer subscription.
## It is possible to define multiple subscriptions per host. Each subscription can have its own
## sampling properties and a list of nodes to subscribe to.
## All subscriptions share the same credentials.
[[inputs.ctrlx_datalayer.subscription]]
## The name of the measurement. (default: “ctrlx”)
measurement = “metrics”

## Configure the ctrlX Data Layer nodes which should be subscribed.
## address – node address in ctrlX Data Layer (mandatory)
## name – field name to use in the output (optional, default: base name of address)
## tags – extra node tags to be added to the output metric (optional)
## Note:
## Use either the inline notation or the bracketed notation, not both.
## The tags property is only supported in bracketed notation due to toml parser restrictions
## Examples:
## Inline notation
nodes=[
{name=”cpu_usage_percent”, address=”framework/metrics/system/cpu-utilisation-percent”},
]
## Bracketed notation
# [[inputs.ctrlx_datalayer.subscription.nodes]]
# name =”available”
# address=”framework/metrics/system/memavailable-mb”
# ## Define extra tags related to node to be added to the output metric (optional)
# [inputs.ctrlx_datalayer.subscription.nodes.tags]
# node_tag1=”node_tag1″
# node_tag2=”node_tag2″
# [[inputs.ctrlx_datalayer.subscription.nodes]]
# name =”used”
# address=”framework/metrics/system/memused-mb”

## The switch “output_json_string” enables output of the measurement as json.
## That way it can be used in in a subsequent processor plugin, e.g. “Starlark Processor Plugin”.
# output_json_string = false

## Define extra tags related to subscription to be added to the output metric (optional)
# [inputs.ctrlx_datalayer.subscription.tags]
# subscription_tag1 = “subscription_tag1”
# subscription_tag2 = “subscription_tag2”

## The interval in which messages shall be sent by the ctrlX Data Layer to this plugin. (default: 1s)
## Higher values reduce load on network by queuing samples on server side and sending as a single TCP packet.
#publish_interval = “1s”

## The interval a “keepalive” message is sent if no change of data occurs. (default: 60s)
## Only used internally to detect broken network connections.
# keep_alive_interval = “60s”

## The interval an “error” message is sent if an error was received from a node. (default: 10s)
## Higher values reduce load on output target and network in case of errors by limiting frequency of error messages.
# error_interval = “10s”

## The interval that defines the fastest rate at which the node values should be sampled and values captured. (default: 1s)
## The sampling frequency should be adjusted to the dynamics of the signal to be sampled.
## Higher sampling frequence increases load on ctrlX Data Layer.
## The sampling frequency can be higher, than the publish interval. Captured samples are put in a queue and sent in publish interval.
## Note: The minimum sampling interval can be overruled by a global setting in the ctrlX Data Layer configuration (‘datalayer/subscriptions/settings’).
#sampling_interval = “1s”

## The requested size of the node value queue. (default: 10)
## Relevant if more values are captured than can be sent.
# queue_size = 10

## The behaviour of the queue if it is full. (default: “DiscardOldest”)
## Possible values:
## – “DiscardOldest”
## The oldest value gets deleted from the queue when it is full.
## – “DiscardNewest”
## The newest value gets deleted from the queue when it is full.
# queue_behaviour = “DiscardOldest”

## The filter when a new value will be sampled. (default: 0.0)
## Calculation rule: If (abs(lastCapturedValue – newValue) > dead_band_value) capture(newValue).
# dead_band_value = 0.0

## The conditions on which a sample should be captured and thus will be sent as a message. (default: “StatusValue”)
## Possible values:
## – “Status”
## Capture the value only, when the state of the node changes from or to error state. Value changes are ignored.
## – “StatusValue”
## Capture when the value changes or the node changes from or to error state.
## See also ‘dead_band_value’ for what is considered as a value change.
## – “StatusValueTimestamp”:
## Capture even if the value is the same, but the timestamp of the value is newer.
## Note: This might lead to high load on the network because every sample will be sent as a message
## even if the value of the node did not change.
# value_change = “StatusValue”

[[inputs.opcua]]
## Metric name
name = “opcua”
#
## OPC UA Endpoint URL
endpoint = “opc.tcp://192.168.5.134:14840/groov”
#
## Maximum time allowed to establish a connect to the endpoint.
connect_timeout = “10s”
#
## Maximum time allowed for a request over the estabilished connection.
request_timeout = “5s”
#
## Security policy, one of “None”, “Basic128Rsa15”, “Basic256”,
## “Basic256Sha256”, or “auto”
security_policy = “None”
#
## Security mode, one of “None”, “Sign”, “SignAndEncrypt”, or “auto”
security_mode = “None”
#
## Path to cert.pem. Required when security mode or policy isn’t “None”.
## If cert path is not supplied, self-signed cert and key will be generated.
# certificate = “/etc/telegraf/cert.pem”
#
## Path to private key.pem. Required when security mode or policy isn’t “None”.
## If key path is not supplied, self-signed cert and key will be generated.
# private_key = “/etc/telegraf/key.pem”
#
## Authentication Method, one of “Certificate”, “UserName”, or “Anonymous”. To
## authenticate using a specific ID, select ‘Certificate’ or ‘UserName’
# auth_method = “Anonymous”
#
## Username. Required for auth_method = “UserName”
# username = “”
#
## Password. Required for auth_method = “UserName”
# password = “”
#
## Option to select the metric timestamp to use. Valid options are:
## “gather” — uses the time of receiving the data in telegraf
## “server” — uses the timestamp provided by the server
## “source” — uses the timestamp provided by the source
# timestamp = “gather”
#
## Node ID configuration
## name – field name to use in the output
## namespace – OPC UA namespace of the node (integer value 0 thru 3)
## identifier_type – OPC UA ID type (s=string, i=numeric, g=guid, b=opaque)
## identifier – OPC UA ID (tag as shown in opcua browser)
## tags – extra tags to be added to the output metric (optional)
## Example:
## {name=”ProductUri”, namespace=”0″, identifier_type=”i”, identifier=”2262″, tags=[[“tag1″,”value1”],[“tag2”,”value2]]}
nodes = [
# {name=””, namespace=””, identifier_type=””, identifier=””},
# {name=””, namespace=””, identifier_type=””, identifier=””},
{name=”DIChannel0″,namespace=”2″,identifier_type=”s”,identifier=”Devices/[optoController]/OptoMMP/Modules/Channels/DI_CHANNEL0/State”}
,{name=”DIChannel1″,namespace=”2″,identifier_type=”s”,identifier=”Devices/[optoController]/OptoMMP/Modules/Channels/DI_CHANNEL1/State”}
,{name=”AIRotarySwitch”,namespace=”2″,identifier_type=”s”,identifier=”Devices/[optoController]/OptoMMP/Modules/Channels/AI_RotarySwitch/Value”}
,{name=”AITempature”,namespace=”2″,identifier_type=”s”,identifier=”Devices/[optoController]/OptoMMP/Modules/Channels/AI_Tempature/Value”}
]
#
## Node Group
## Sets defaults for OPC UA namespace and ID type so they aren’t required in
## every node. A group can also have a metric name that overrides the main
## plugin metric name.
##
## Multiple node groups are allowed
#[[inputs.opcua.group]]
## Group Metric name. Overrides the top level name. If unset, the
## top level name is used.
# name =
#
## Group default namespace. If a node in the group doesn’t set its
## namespace, this is used.
# namespace =
#
## Group default identifier type. If a node in the group doesn’t set its
## namespace, this is used.
# identifier_type =
#
## Node ID Configuration. Array of nodes with the same settings as above.
# nodes = [
# {name=””, namespace=””, identifier_type=””, identifier=””},
# {name=””, namespace=””, identifier_type=””, identifier=””},
#]

## Enable workarounds required by some devices to work correctly
# [inputs.opcua.workarounds]
## Set additional valid status codes, StatusOK (0x0) is always considered valid
# additional_valid_status_codes = [“0xC0”]

# Retrieve data from MODBUS slave devices

[[inputs.modbus]]
## Connection Configuration
##
## The plugin supports connections to PLCs via MODBUS/TCP, RTU over TCP, ASCII over TCP or
## via serial line communication in binary (RTU) or readable (ASCII) encoding
##
## Device name
name = “ModbusDriverOpto22”

## Slave ID – addresses a MODBUS device on the bus
## Range: 0 – 255 [0 = broadcast; 248 – 255 = reserved]
slave_id = 21

## Timeout for each request
timeout = “1s”

## Maximum number of retries and the time to wait between retries
## when a slave-device is busy.
# busy_retries = 0
# busy_retries_wait = “100ms”

# TCP – connect via Modbus/TCP
controller = “tcp://192.168.5.134:502”

## Serial (RS485; RS232)
# controller = “file:///dev/ttyUSB0”
# baud_rate = 9600
# data_bits = 8
# parity = “N”
# stop_bits = 1

## For Modbus over TCP you can choose between “TCP”, “RTUoverTCP” and “ASCIIoverTCP”
## default behaviour is “TCP” if the controller is TCP
## For Serial you can choose between “RTU” and “ASCII”
# transmission_mode = “RTU”

## Trace the connection to the modbus device as debug messages
## Note: You have to enable telegraf’s debug mode to see those messages!
# debug_connection = false

## Define the configuration schema
## |—register — define fields per register type in the original style (only supports one slave ID)
## |—request — define fields on a requests base
configuration_type = “register”

## — “register” configuration style —

## Measurements
##

## Digital Variables, Discrete Inputs and Coils
## measurement – the (optional) measurement name, defaults to “modbus”
## name – the variable name
## address – variable address

#discrete_inputs = [
# { name = “start”, address = [0]},
# { name = “stop”, address = [1]},
# { name = “reset”, address = [2]},
# { name = “emergency_stop”, address = [3]},
#]
#coils = [
# { name = “motor1_run”, address = [0]},
# { name = “motor1_jog”, address = [1]},
# { name = “motor1_stop”, address = [2]},
#]

## Analog Variables, Input Registers and Holding Registers
## measurement – the (optional) measurement name, defaults to “modbus”
## name – the variable name
## byte_order – the ordering of bytes
## |—AB, ABCD – Big Endian
## |—BA, DCBA – Little Endian
## |—BADC – Mid-Big Endian
## |—CDAB – Mid-Little Endian
## data_type – INT16, UINT16, INT32, UINT32, INT64, UINT64,
## FLOAT32-IEEE, FLOAT64-IEEE (the IEEE 754 binary representation)
## FLOAT32, FIXED, UFIXED (fixed-point representation on input)
## scale – the final numeric variable representation
## address – variable address

holding_registers = [
{ name = “RotarySwitch”, byte_order = “ABCD”, data_type = “FLOAT32-IEEE”, scale=1.0 ,address = [6144,6145]}
, { name = “RotarySwitch_MinLimit”, byte_order = “ABCD”, data_type = “FLOAT32-IEEE”, scale=1.0, address = [6148,6149]}
, { name = “RotarySwitch_MaxLimit”, byte_order = “ABCD”, data_type = “FLOAT32-IEEE”, scale=1.0, address = [6150,6151]}
# { name = “voltage”, byte_order = “AB”, data_type = “FIXED”, scale=0.1, address = [0]},
# { name = “energy”, byte_order = “ABCD”, data_type = “FIXED”, scale=0.001, address = [5,6]},
# { name = “current”, byte_order = “ABCD”, data_type = “FIXED”, scale=0.001, address = [1,2]},
# { name = “frequency”, byte_order = “AB”, data_type = “UFIXED”, scale=0.1, address = [7]},
# { name = “power”, byte_order = “ABCD”, data_type = “UFIXED”, scale=0.1, address = [3,4]},
]
# input_registers = [
# { name = “tank_level”, byte_order = “AB”, data_type = “INT16”, scale=1.0, address = [0]},
# { name = “tank_ph”, byte_order = “AB”, data_type = “INT16”, scale=1.0, address = [1]},
# { name = “pump1_speed”, byte_order = “ABCD”, data_type = “INT32”, scale=1.0, address = [3,4]},
# ]

## Enable workarounds required by some devices to work correctly
# [inputs.modbus.workarounds]
## Pause between read requests sent to the device. This might be necessary for (slow) serial devices.
# pause_between_requests = “0ms”
## Close the connection after every gather cycle. Usually the plugin closes the connection after a certain
## idle-timeout, however, if you query a device with limited simultaneous connectivity (e.g. serial devices)
## from multiple instances you might want to only stay connected during gather and disconnect afterwards.
# close_connection_after_gather = false

[agent]
interval = “5s”
round_interval = true
flush_interval = “5s”

## Install InfluxDB at first
## Set up the InfluxDB with organization and initial bucket
## Log in the InfluxDB UI and get the token
## Configure the output plugin influxdb_v2 with these datas
[[outputs.influxdb_v2]]
urls = [“https://127.0.0.1/influxdb”]
token = “CquPrz9Vmbx-QgvMqGJgMVdHADDkjVAKZELRcANRKqWXRr-nxKQfVEGesQz6gad5GNV1neHdSMKfkd5eb5urkA==”
organization = “mana”
bucket = “mainBucket2”
insecure_skip_verify = true

## Configure the input plugin with the username and password to ctrlX Core
[[inputs.ctrlx_datalayer]]
## Hostname or IP address of the ctrlX CORE Data Layer server
## example: server = “localhost” # Telegraf is running directly on the device
## server = “192.168.1.1” # Connect to ctrlX CORE remote via IP
## server = “host.example.com” # Connect to ctrlX CORE remote via hostname
## server = “10.0.2.2:8443” # Connect to ctrlX CORE Virtual from development environment
server = “192.168.5.67:8443”

## Authentication credentials
username = “boschrexroth”
password = “boschrexroth”

## Use TLS but skip chain & host verification
insecure_skip_verify = true

## Timeout for HTTP requests. (default: “10s”)
# timeout = “10s”

## Create a ctrlX Data Layer subscription.
## It is possible to define multiple subscriptions per host. Each subscription can have its own
## sampling properties and a list of nodes to subscribe to.
## All subscriptions share the same credentials.
[[inputs.ctrlx_datalayer.subscription]]
## The name of the measurement. (default: “ctrlx”)
measurement = “metrics”

## Configure the ctrlX Data Layer nodes which should be subscribed.
## address – node address in ctrlX Data Layer (mandatory)
## name – field name to use in the output (optional, default: base name of address)
## tags – extra node tags to be added to the output metric (optional)
## Note:
## Use either the inline notation or the bracketed notation, not both.
## The tags property is only supported in bracketed notation due to toml parser restrictions
## Examples:
## Inline notation
nodes=[
{name=”cpu_usage_percent”, address=”framework/metrics/system/cpu-utilisation-percent”},
]
## Bracketed notation
# [[inputs.ctrlx_datalayer.subscription.nodes]]
# name =”available”
# address=”framework/metrics/system/memavailable-mb”
# ## Define extra tags related to node to be added to the output metric (optional)
# [inputs.ctrlx_datalayer.subscription.nodes.tags]
# node_tag1=”node_tag1″
# node_tag2=”node_tag2″
# [[inputs.ctrlx_datalayer.subscription.nodes]]
# name =”used”
# address=”framework/metrics/system/memused-mb”

## The switch “output_json_string” enables output of the measurement as json.
## That way it can be used in in a subsequent processor plugin, e.g. “Starlark Processor Plugin”.
# output_json_string = false

## Define extra tags related to subscription to be added to the output metric (optional)
# [inputs.ctrlx_datalayer.subscription.tags]
# subscription_tag1 = “subscription_tag1”
# subscription_tag2 = “subscription_tag2”

## The interval in which messages shall be sent by the ctrlX Data Layer to this plugin. (default: 1s)
## Higher values reduce load on network by queuing samples on server side and sending as a single TCP packet.
#publish_interval = “1s”

## The interval a “keepalive” message is sent if no change of data occurs. (default: 60s)
## Only used internally to detect broken network connections.
# keep_alive_interval = “60s”

## The interval an “error” message is sent if an error was received from a node. (default: 10s)
## Higher values reduce load on output target and network in case of errors by limiting frequency of error messages.
# error_interval = “10s”

## The interval that defines the fastest rate at which the node values should be sampled and values captured. (default: 1s)
## The sampling frequency should be adjusted to the dynamics of the signal to be sampled.
## Higher sampling frequence increases load on ctrlX Data Layer.
## The sampling frequency can be higher, than the publish interval. Captured samples are put in a queue and sent in publish interval.
## Note: The minimum sampling interval can be overruled by a global setting in the ctrlX Data Layer configuration (‘datalayer/subscriptions/settings’).
#sampling_interval = “1s”

## The requested size of the node value queue. (default: 10)
## Relevant if more values are captured than can be sent.
# queue_size = 10

## The behaviour of the queue if it is full. (default: “DiscardOldest”)
## Possible values:
## – “DiscardOldest”
## The oldest value gets deleted from the queue when it is full.
## – “DiscardNewest”
## The newest value gets deleted from the queue when it is full.
# queue_behaviour = “DiscardOldest”

## The filter when a new value will be sampled. (default: 0.0)
## Calculation rule: If (abs(lastCapturedValue – newValue) > dead_band_value) capture(newValue).
# dead_band_value = 0.0

## The conditions on which a sample should be captured and thus will be sent as a message. (default: “StatusValue”)
## Possible values:
## – “Status”
## Capture the value only, when the state of the node changes from or to error state. Value changes are ignored.
## – “StatusValue”
## Capture when the value changes or the node changes from or to error state.
## See also ‘dead_band_value’ for what is considered as a value change.
## – “StatusValueTimestamp”:
## Capture even if the value is the same, but the timestamp of the value is newer.
## Note: This might lead to high load on the network because every sample will be sent as a message
## even if the value of the node did not change.
# value_change = “StatusValue”

[[inputs.opcua]]
## Metric name
name = “opcua”
#
## OPC UA Endpoint URL
endpoint = “opc.tcp://192.168.5.134:14840/groov”
#
## Maximum time allowed to establish a connect to the endpoint.
connect_timeout = “10s”
#
## Maximum time allowed for a request over the estabilished connection.
request_timeout = “5s”
#
## Security policy, one of “None”, “Basic128Rsa15”, “Basic256”,
## “Basic256Sha256”, or “auto”
security_policy = “None”
#
## Security mode, one of “None”, “Sign”, “SignAndEncrypt”, or “auto”
security_mode = “None”
#
## Path to cert.pem. Required when security mode or policy isn’t “None”.
## If cert path is not supplied, self-signed cert and key will be generated.
# certificate = “/etc/telegraf/cert.pem”
#
## Path to private key.pem. Required when security mode or policy isn’t “None”.
## If key path is not supplied, self-signed cert and key will be generated.
# private_key = “/etc/telegraf/key.pem”
#
## Authentication Method, one of “Certificate”, “UserName”, or “Anonymous”. To
## authenticate using a specific ID, select ‘Certificate’ or ‘UserName’
# auth_method = “Anonymous”
#
## Username. Required for auth_method = “UserName”
# username = “”
#
## Password. Required for auth_method = “UserName”
# password = “”
#
## Option to select the metric timestamp to use. Valid options are:
## “gather” — uses the time of receiving the data in telegraf
## “server” — uses the timestamp provided by the server
## “source” — uses the timestamp provided by the source
# timestamp = “gather”
#
## Node ID configuration
## name – field name to use in the output
## namespace – OPC UA namespace of the node (integer value 0 thru 3)
## identifier_type – OPC UA ID type (s=string, i=numeric, g=guid, b=opaque)
## identifier – OPC UA ID (tag as shown in opcua browser)
## tags – extra tags to be added to the output metric (optional)
## Example:
## {name=”ProductUri”, namespace=”0″, identifier_type=”i”, identifier=”2262″, tags=[[“tag1″,”value1”],[“tag2”,”value2]]}
nodes = [
# {name=””, namespace=””, identifier_type=””, identifier=””},
# {name=””, namespace=””, identifier_type=””, identifier=””},
{name=”DIChannel0″,namespace=”2″,identifier_type=”s”,identifier=”Devices/[optoController]/OptoMMP/Modules/Channels/DI_CHANNEL0/State”}
,{name=”DIChannel1″,namespace=”2″,identifier_type=”s”,identifier=”Devices/[optoController]/OptoMMP/Modules/Channels/DI_CHANNEL1/State”}
,{name=”AIRotarySwitch”,namespace=”2″,identifier_type=”s”,identifier=”Devices/[optoController]/OptoMMP/Modules/Channels/AI_RotarySwitch/Value”}
,{name=”AITempature”,namespace=”2″,identifier_type=”s”,identifier=”Devices/[optoController]/OptoMMP/Modules/Channels/AI_Tempature/Value”}
]
#
## Node Group
## Sets defaults for OPC UA namespace and ID type so they aren’t required in
## every node. A group can also have a metric name that overrides the main
## plugin metric name.
##
## Multiple node groups are allowed
#[[inputs.opcua.group]]
## Group Metric name. Overrides the top level name. If unset, the
## top level name is used.
# name =
#
## Group default namespace. If a node in the group doesn’t set its
## namespace, this is used.
# namespace =
#
## Group default identifier type. If a node in the group doesn’t set its
## namespace, this is used.
# identifier_type =
#
## Node ID Configuration. Array of nodes with the same settings as above.
# nodes = [
# {name=””, namespace=””, identifier_type=””, identifier=””},
# {name=””, namespace=””, identifier_type=””, identifier=””},
#]

## Enable workarounds required by some devices to work correctly
# [inputs.opcua.workarounds]
## Set additional valid status codes, StatusOK (0x0) is always considered valid
# additional_valid_status_codes = [“0xC0”]

# Retrieve data from MODBUS slave devices

[[inputs.modbus]]
## Connection Configuration
##
## The plugin supports connections to PLCs via MODBUS/TCP, RTU over TCP, ASCII over TCP or
## via serial line communication in binary (RTU) or readable (ASCII) encoding
##
## Device name
name = “ModbusDriverOpto22”

## Slave ID – addresses a MODBUS device on the bus
## Range: 0 – 255 [0 = broadcast; 248 – 255 = reserved]
slave_id = 21

## Timeout for each request
timeout = “1s”

## Maximum number of retries and the time to wait between retries
## when a slave-device is busy.
# busy_retries = 0
# busy_retries_wait = “100ms”

# TCP – connect via Modbus/TCP
controller = “tcp://192.168.5.134:502”

## Serial (RS485; RS232)
# controller = “file:///dev/ttyUSB0”
# baud_rate = 9600
# data_bits = 8
# parity = “N”
# stop_bits = 1

## For Modbus over TCP you can choose between “TCP”, “RTUoverTCP” and “ASCIIoverTCP”
## default behaviour is “TCP” if the controller is TCP
## For Serial you can choose between “RTU” and “ASCII”
# transmission_mode = “RTU”

## Trace the connection to the modbus device as debug messages
## Note: You have to enable telegraf’s debug mode to see those messages!
# debug_connection = false

## Define the configuration schema
## |—register — define fields per register type in the original style (only supports one slave ID)
## |—request — define fields on a requests base
configuration_type = “register”

## — “register” configuration style —

## Measurements
##

## Digital Variables, Discrete Inputs and Coils
## measurement – the (optional) measurement name, defaults to “modbus”
## name – the variable name
## address – variable address

#discrete_inputs = [
# { name = “start”, address = [0]},
# { name = “stop”, address = [1]},
# { name = “reset”, address = [2]},
# { name = “emergency_stop”, address = [3]},
#]
#coils = [
# { name = “motor1_run”, address = [0]},
# { name = “motor1_jog”, address = [1]},
# { name = “motor1_stop”, address = [2]},
#]

## Analog Variables, Input Registers and Holding Registers
## measurement – the (optional) measurement name, defaults to “modbus”
## name – the variable name
## byte_order – the ordering of bytes
## |—AB, ABCD – Big Endian
## |—BA, DCBA – Little Endian
## |—BADC – Mid-Big Endian
## |—CDAB – Mid-Little Endian
## data_type – INT16, UINT16, INT32, UINT32, INT64, UINT64,
## FLOAT32-IEEE, FLOAT64-IEEE (the IEEE 754 binary representation)
## FLOAT32, FIXED, UFIXED (fixed-point representation on input)
## scale – the final numeric variable representation
## address – variable address

holding_registers = [
{ name = “RotarySwitch”, byte_order = “ABCD”, data_type = “FLOAT32-IEEE”, scale=1.0 ,address = [6144,6145]}
, { name = “RotarySwitch_MinLimit”, byte_order = “ABCD”, data_type = “FLOAT32-IEEE”, scale=1.0, address = [6148,6149]}
, { name = “RotarySwitch_MaxLimit”, byte_order = “ABCD”, data_type = “FLOAT32-IEEE”, scale=1.0, address = [6150,6151]}
# { name = “voltage”, byte_order = “AB”, data_type = “FIXED”, scale=0.1, address = [0]},
# { name = “energy”, byte_order = “ABCD”, data_type = “FIXED”, scale=0.001, address = [5,6]},
# { name = “current”, byte_order = “ABCD”, data_type = “FIXED”, scale=0.001, address = [1,2]},
# { name = “frequency”, byte_order = “AB”, data_type = “UFIXED”, scale=0.1, address = [7]},
# { name = “power”, byte_order = “ABCD”, data_type = “UFIXED”, scale=0.1, address = [3,4]},
]
# input_registers = [
# { name = “tank_level”, byte_order = “AB”, data_type = “INT16”, scale=1.0, address = [0]},
# { name = “tank_ph”, byte_order = “AB”, data_type = “INT16”, scale=1.0, address = [1]},
# { name = “pump1_speed”, byte_order = “ABCD”, data_type = “INT32”, scale=1.0, address = [3,4]},
# ]

## Enable workarounds required by some devices to work correctly
# [inputs.modbus.workarounds]
## Pause between read requests sent to the device. This might be necessary for (slow) serial devices.
# pause_between_requests = “0ms”
## Close the connection after every gather cycle. Usually the plugin closes the connection after a certain
## idle-timeout, however, if you query a device with limited simultaneous connectivity (e.g. serial devices)
## from multiple instances you might want to only stay connected during gather and disconnect afterwards.
# close_connection_after_gather = false

# Read metrics from MQTT topic(s)
[[inputs.mqtt_consumer]]
## Broker URLs for the MQTT server or cluster. To connect to multiple
## clusters or standalone servers, use a separate plugin instance.
## example: servers = [“tcp://localhost:1883”]
## servers = [“ssl://localhost:1883”]
## servers = [“ws://localhost:1883”]
servers = [“tcp://192.168.5.72:1883”]

## Topics that will be subscribed to.
topics = [
“IOModuleSlots/optoController/OptoMMP/Modules/Channels/DI_CHANNEL0/State”,
“IOModuleSlots/optoController/OptoMMP/Modules/Channels/AI_Tempature/Value”,
“IOModuleSlots/optoController/OptoMMP/Modules/Channels/AI_RotarySwitch/Value”,
“IOModuleSlots/optoController/Device Properties/Firmware Version”,
“IOModuleSlots/optoController/Device Properties/Part Number”

]

## The message topic will be stored in a tag specified by this value. If set
## to the empty string no topic tag will be created.
topic_tag = “topic”

## QoS policy for messages
## 0 = at most once
## 1 = at least once
## 2 = exactly once
##
## When using a QoS of 1 or 2, you should enable persistent_session to allow
## resuming unacknowledged messages.
# qos = 0

## Connection timeout for initial connection in seconds
# connection_timeout = “30s”

## Maximum messages to read from the broker that have not been written by an
## output. For best throughput set based on the number of metrics within
## each message and the size of the output’s metric_batch_size.
##
## For example, if each message from the queue contains 10 metrics and the
## output metric_batch_size is 1000, setting this to 100 will ensure that a
## full batch is collected and the write is triggered immediately without
## waiting until the next flush_interval.
# max_undelivered_messages = 1000

## Persistent session disables clearing of the client session on connection.
## In order for this option to work you must also set client_id to identify
## the client. To receive messages that arrived while the client is offline,
## also set the qos option to 1 or 2 and don’t forget to also set the QoS when
## publishing.
# persistent_session = false

## If unset, a random client ID will be generated.
# client_id = “”

## Username and password to connect MQTT server.
# username = “telegraf”
# password = “metricsmetricsmetricsmetrics”

## Optional TLS Config
# tls_ca = “/etc/telegraf/ca.pem”
# tls_cert = “/etc/telegraf/cert.pem”
# tls_key = “/etc/telegraf/key.pem”
## Use TLS but skip chain & host verification
# insecure_skip_verify = false

## Data format to consume.
## Each data format has its own unique set of configuration options, read
## more about them here:
## https://github.com/influxdata/telegraf/blob/master/docs/DATA_FORMATS_INPUT.md
data_format = “value”
data_type = “float”